Write the reference on all five faces of the box
You’ve decided on a reference system. Good. Now the labeling detail that pays back the most on moving day:
Write it on five sides of the box, not just two.
Top and one side feels enough — and for boxes sitting in the flat, it is. Then the boxes go into the truck — lying on their sides, rotated, half-buried under the duvet bags. Now the person unloading has to tumble a 15 kg box just to read its reference. That’s five times per box — and with forty+ boxes, it adds up fast.
The tip
Mark the reference on five faces:
- Top
- All four sides
Use a thick marker, and letters large enough to read from two metres away. The box reference is the only text the box needs to carry — everything else lives in the list (see Don’t write the destination on the box).
Why it works
A box in transit can land in any direction — the truck doesn’t know which side you labeled, and stacked boxes usually show whatever’s on top. The top is visible roughly as often as not — usually less, because boxes get stacked.
Five faces turn “read the label” from a small logistics problem into a glance. The unloader sees the reference, drops the box in the right stack, moves on. No tumbling, no calling, no guessing.
How to do it
- Close the box first, then label — it’s easier to tape a label flat on five faces than to reach around a half-packed box.
- Same marker, same size, same position (corner, facing up) on every box. Consistency is what makes it a glance instead of a search.
- Skip the bottom. Nobody reads a box’s bottom; the five faces above cover every angle a box can land in.
- Keep a spare marker taped to the box cutter — the day the marker runs out mid-box-12 is a day you never want.
Free, thirty seconds — or play with the demo and feel free to break it.